| Parameter | Specification |
| Product Name | FAW 380HP Truck Clutch Master Cylinder / Hydraulic Clutch Actuation Pump |
| Part Number / Model Number | S1602110K185 |
| Vehicle Brand & Truck Compatibility | FAW Jiefang 380HP Series Heavy-Duty Commercial Trucks, Tractors & Dumpers |
| System Category | Heavy-Duty Commercial Vehicle Hydraulic Clutch Actuation & Drivetrain Control System |
| Product Purpose | Fleet Clutch Maintenance, Master Cylinder Replacement & Hydraulic Repair (replace/repair) |
| Product Condition | 100% Brand-New OEM Standard (New) |
| Warranty Coverage | 6 Months Manufacturer Warranty |
| Quality Standard | Fully Guaranteed, Pressure- & Leak-Tested OEM Standard |
| Place of Origin | Shandong, China |
| Minimum Order Quantity (MOQ) | 1 Piece (Sample Trial Orders & Bulk Wholesale Supported) |
| Single Package Size | 25 x 15 x 10 cm |
| Single Gross Weight | 2.0 kg |
| Standard Packaging | Dust-Capped Protective VCI Bag & Reinforced Neutral Export Carton Box |
| Payment Terms | T/T (30% Deposit, 70% Balance Before Shipment), Western Union |
| Delivery Lead Time | Ultra-Fast Dispatch within 1 to 3 Days |
Direct Factory Wholesale & Flexible MOQ: Sourced directly from our Shandong OEM supply base to eliminate middleman markups, offering competitive tiered wholesale pricing for distributor bulk orders alongside a 1-piece MOQ for urgent fleet workshop repairs or quality sample evaluation.
Export-Ready Contamination-Free Packaging: Each 2.0 kg clutch master cylinder is fitted with protective dust plugs over the hydraulic outlet port and fluid reservoir inlet, sealed inside an anti-moisture VCI bag to protect internal bore surfaces from humidity during transit, and packed in a reinforced 25 x 15 x 10 cm neutral export carton box (consolidated into master cartons for palletized sea freight).
Ultra-Fast Global Dispatch & Multi-Modal Freight: Ready-to-ship warehouse stock enables immediate order fulfillment within 1 to 3 days, supporting urgent air cargo dispatch for grounded fleet trucks as well as LCL/FCL ocean container consolidation alongside full-line FAW Jiefang, Sinotruk, and Shacman clutch boosters (slave cylinders), release bearings, clutch discs, and pressure plates.
Standardized International Trade Terms: Supports transparent B2B procurement workflows with T/T (30% deposit) and Western Union payment options, complete with commercial invoices, packing lists, and export customs documentation.
Heavy-duty 380HP commercial trucks utilize high-clamp-load diaphragm clutches paired with pneumatic-hydraulic clutch servo boosters to reduce driver pedal effort during frequent city and highway gear changes. The FAW 380HP truck clutch master cylinder S1602110K185 serves as the primary hydraulic pressure generator mounted directly behind the cab clutch pedal linkage.
When the driver depresses the clutch pedal, the mechanical pushrod drives the internal aluminum/steel piston forward inside the cylinder bore. As the primary rubber cup seal passes the compensating port, hydraulic brake/clutch fluid (DOT 3 / DOT 4) is trapped and pressurized smoothly through the steel/flexible hydraulic line down to the transmission-mounted clutch booster. This hydraulic pilot pressure triggers the pneumatic servo valve to assist the release fork—disengaging the clutch cleanly without gear clash—while releasing the pedal allows the return spring to retract the piston and equalize fluid volume back into the reservoir.
Cab-mounted hydraulic clutch master cylinders endure hundreds of thousands of pedal strokes, temperature swings between cab heat and freezing winter mornings, and hygroscopic brake-fluid exposure:
Precision-Honed Cast Iron / Die-Cast Aluminum Alloy Body: Mirror-finished internal cylinder bore machined to strict roundness and micro-roughness tolerances to prevent cup-seal tearing, fluid bypass, and premature bore scoring.
Hard-Anodized / Chrome-Finished Piston & High-Tensile Return Spring: Corrosion-resistant internal piston paired with a calibrated spring-steel return spring to guarantee rapid piston retraction and crisp clutch pedal return.
High-Durability EPDM Primary & Secondary Cup Seals: Formulated specifically for glycol-based DOT 3 and DOT 4 hydraulic fluids to resist swelling, softening, or hardening across extreme operating temperatures (-40°C to +110°C).
Reinforced Pushrod Clevis & Accordion Rubber Dust Boot: Heavy-duty adjustable pushrod linkage shielded by a flexible elastomer dust boot to block cab floor grit and moisture from entering the cylinder bore.
A leaking, worn, or air-bound clutch master cylinder causes spongy pedal feel, incomplete clutch disengagement, and rapid synchromesh wear inside the gearbox. Fleet mechanics and drivetrain specialists should inspect or replace the S1602110K185 clutch master cylinder upon detecting:
Clutch Pedal Sinking Slowly to the Floor When Held Down: Internal fluid bypass past worn primary cup seals, preventing the hydraulic circuit from holding steady pressure at traffic stops.
Hydraulic Fluid Wetness Inside the Cab Firewall or Torn Dust Boot: External seal failure leaking DOT fluid down the clutch pedal pushrod onto the cab floor mat.
Spongy Pedal Feel & Hard Gear Shifting / Grinding into 1st or Reverse: Air ingestion past worn secondary seals or clogged compensating ports resulting in insufficient hydraulic stroke at the clutch booster.
Slow or Incomplete Clutch Pedal Return: Weakened internal return spring, swollen seals from contaminated fluid, or a corroded bore wall causing the piston to stick mid-stroke.
To achieve firm pedal response and maximum seal life when installing the S1602110K185 clutch master cylinder:
Bench-Bleed Master Cylinder Prior to Mounting: Before bolting the S1602110K185 master cylinder onto the FAW cab firewall, secure it level in a vise, fill with fresh clean DOT 3 or DOT 4 fluid, and stroke the pushrod smoothly until all air bubbles are purged from the outlet port.
Flush Old Contaminated Fluid & Inspect Clutch Booster: Dark, moisture-laden fluid degrades EPDM seals rapidly; flush the hydraulic line cleanly before connecting to the transmission clutch booster and check the booster for concurrent leaks.
Adjust Pedal Free-Play & Bleed Line Completely: Bolt the cylinder to the firewall, connect the clevis pin to the clutch pedal, adjust pushrod free-play to FAW OEM specifications (ensuring the piston fully uncovers the compensating port at rest), and bleed the slave/booster bleeder screw until a solid, bubble-free fluid stream emerges.
Q1: Which truck application is part number S1602110K185 engineered for?Answer: Part number S1602110K185 is an OEM-standard clutch master cylinder engineered specifically for FAW Jiefang 380HP heavy-duty commercial trucks, tractors, and dumpers.
Q2: What warranty coverage is provided with the S1602110K185 clutch master cylinder?Answer: This product is backed by a 6-Month Manufacturer Warranty, guaranteeing precision bore finish, airtight EPDM seal integrity, and reliable hydraulic pressure output.
Q3: How is this 2.0 kg clutch master cylinder packaged for international export shipments?Answer: Each 2.0 kg unit is fitted with protective port caps, sealed inside an anti-moisture VCI bag, and packed in a reinforced 25 x 15 x 10 cm neutral export carton box suitable for air cargo or palletized ocean freight.
Q4: What are the MOQ, payment terms, and delivery lead times for B2B wholesale buyers?Answer: We support flexible procurement starting from a 1-piece MOQ up to bulk distributor orders. Payment terms are T/T (30% deposit) and Western Union, with stocked inventory dispatched within 1 to 3 days from Shandong, China.
Part Number / Model: S1602110K185
Description: FAW 380HP Truck Clutch Master Cylinder (Hydraulic Clutch Actuation Pump)
Availability: Stock Ready for Ultra-Fast Dispatch (1–3 Days)
MOQ: 1 Piece (Competitive Wholesale Tier Pricing Available for Bulk Fleet Orders)



Address
Lemeng Apartment, Jingshi Road, Huaiyin District, Jinan City, Shandong Province
Tel

