Searching to buy or wholesale original FAW J6 hand brake relay valve 3516020-435 (also cross-referenced as 3518 007 021 0) directly from an established Chinese commercial vehicle pneumatic brake system parts supplier, exporter, and manufacturer? The high-precision 3516020-435 FAW J6 hand brake relay valve is an essential pneumatic brake control component engineered specifically for FAW Jiefang J6 series heavy-duty commercial trucks, dumpers, and long-haul transport tractors. Installed within the rear axle parking and emergency braking air circuit, this OEM-standard relay valve accelerates compressed air charging and exhausting at the spring brake chambers, ensuring rapid parking brake release, instantaneous emergency stopping response, and balanced braking safety under heavy commercial payloads.
Heavy-duty commercial tractors and multi-axle trucks feature long pneumatic air lines connecting the cab dashboard hand brake valve to the rear spring brake chambers. Relying solely on cab valve air flow would cause dangerous delays in brake engagement and release. The FAW J6 hand brake relay valve 3516020-435 serves as a high-flow local pneumatic booster near the rear axles.
Connected directly to the chassis air reservoir and the control signal line from the hand brake valve, the 3516020-435 relay valve responds immediately to pilot pressure changes. When the driver releases the parking brake, pilot air pressure pushes down the internal relay piston, opening the supply port to rapidly flood the spring brake chambers with high-volume compressed air from the nearby tank, compressing the power springs and releasing the wheels. Conversely, when the hand brake is applied, pilot pressure drops and the internal exhaust diaphragm opens instantaneously, venting spring chamber air directly to the atmosphere for immediate, positive mechanical brake lock-up.
Chassis-mounted pneumatic relay valves operate continuously under high air line pressures, rapid thermal cycling, compressor oil mist, and harsh under-chassis road conditions:
High-Density Die-Cast Aluminum Alloy Housing: Manufactured from corrosion-resistant, precision-machined aluminum alloy that withstands high pneumatic operating pressures (up to 12+ bar) without housing porosity or structural fatigue.
Oil- and Cold-Resistant NBR / Viton Seals: Fitted with high-elasticity nitrile (NBR) and fluororubber diaphragms and O-rings engineered to maintain airtight sealing across extreme ambient temperatures (-40°C to +100°C) without hardening or swelling.
Precision-Machined Internal Relay Piston & Springs: Outfitted with low-friction anodized alloy pistons and high-fatigue stainless steel return springs to prevent valve sticking and guarantee crisp, repeatable pressure modulation.
Integrated Dust-Protected Exhaust Flap: Features a flexible rubber exhaust check-flap at the bottom vent port to expel moisture and oil condensate while blocking mud, water splash, and road dust ingress.
A leaking or sluggish hand brake relay valve compromises parking brake holding force, causes slow brake release, and leads to dragging brakes or premature brake lining wear. Fleet mechanics and air brake technicians should inspect or replace the 3516020-435 hand brake relay valve upon detecting:
Continuous Air Leak from Valve Exhaust Port: Constant air hissing from the bottom exhaust vent when the parking brake is released, indicating a torn internal relay diaphragm or damaged supply valve seat.
Slow Parking Brake Release or Dragging Rear Wheels: Delayed wheel release after pushing in the dashboard park valve, caused by a sticky internal piston, corroded return spring, or restricted pilot port.
Failure of Parking Brake to Hold on Inclines: Incomplete air exhaust from the spring brake chambers due to a clogged exhaust flap or jammed valve spool.
Rapid Air Tank Pressure Loss While Parked: Audible air leakage around valve body seams or threaded port fittings resulting in frequent air compressor cycling.
Technical Specifications & Parameter Matrix
Parameter
Specification
Product Name
FAW J6 Hand Brake Relay Valve / Parking Brake Relay Control Valve
Part Number / OE NO.
3516020-435 (Cross-Reference: 3518 007 021 0)
Vehicle Brand & Car Model
FAW Jiefang J6 Series Heavy Commercial Trucks & Tractors
System Category
Commercial Truck Pneumatic Parking & Emergency Brake System
Size
OEM Standard
Product Purpose
Fleet Air Brake Maintenance, Valve Replacement & Repair (replace/repair)
Best Practices for Installation & Pneumatic System Servicing
To prevent internal valve contamination and ensure leak-free air brake operation post-installation:
Purge Air Tanks & Flush Supply Lines: Drain accumulated water and compressor oil from chassis air reservoirs and blow out supply lines before connecting the new 3516020-435 relay valve to prevent debris from lodging under valve seats.
Verify Port Identification & Thread Sealing: Confirm correct connection of the Supply (1), Delivery (2), and Control/Pilot (4) ports; apply non-hardening pneumatic thread sealant sparingly to male fittings while keeping sealant away from internal passages.
Conduct Full Pressure & Soap-Bubble Leak Test: Pressurize the air system to normal cut-out pressure (8.5–10 bar), cycle the hand brake valve repeatedly, and inspect all ports and the exhaust vent with soapy water to verify 100% airtight sealing.
Frequently Asked Questions (FAQ)
Q1: Are part numbers 3516020-435 and 3518 007 021 0 interchangeable for FAW J6 trucks?Answer: Yes,3516020-435 and 3518 007 021 0 cross-reference the exact same OEM hand brake relay valve specification engineered for FAW Jiefang J6 commercial heavy trucks.
Q2: What warranty protection covers the 3516020-435 relay valve?Answer: Every 3516020-435 hand brake relay valve is backed by a 6 Months Manufacturer Warranty, guaranteeing airtight sealing performance and OEM dimensional accuracy.
Q3: How is this 1.0 kg pneumatic valve packaged for international shipping?Answer: Each 1.0 kg relay valve is fitted with protective plastic port dust caps, sealed inside a moisture-resistant poly bag, and packed in a compact 15x10x10 cm neutral export box with internal cushioning to protect threaded ports during transit.
Q4: What is the delivery lead time and payment term for B2B wholesale orders?Answer: Stocked inventory is processed immediately for fast international dispatch within 3 to 7 days via air express, air cargo, or ocean freight under standard T/T payment terms.
Packaging, Logistics & B2B Procurement
Protective Export Neutral Packaging: Fitted with protective port plugs and packed inside a compact 15x10x10 cm neutral export box (1.0 kg gross weight) with internal padding to safeguard precision thread ports and housing surfaces during transit.
Fast Global Dispatch Logistics: In-stock for rapid order fulfillment, with international shipping ready within 3 to 7 days via air express couriers, air cargo, or containerized ocean freight.
Flexible B2B Procurement: Low minimum order quantity starting from 1 piece accommodates urgent single-truck repairs, supported by volume distributor pricing via standard T/T payment terms.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy