Products
Left Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 Aowei
  • Left Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 AoweiLeft Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 Aowei
  • Left Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 AoweiLeft Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 Aowei
  • Left Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 AoweiLeft Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 Aowei

Left Tie Rod End Ball Joint 3003055-1H for FAW Jiefang J6 Aowei

Model:3003055-1H
Searching to buy or wholesale original FAW Jiefang J6 Aowei left tie rod end ball joint 3003055-1H directly from an established Chinese commercial vehicle steering and suspension parts supplier, exporter, and manufacturer? The heavy-duty 3003055-1H FAW left tie rod end ball joint is a critical steering linkage component engineered specifically for FAW Jiefang J6 and Aowei series heavy-duty commercial trucks, dumpers, and long-haul transport tractors. Installed at the left-hand end of the front axle steering tie rod assembly, this precision ball-and-socket joint transmits steering gear forces directly to the steering knuckle arm while accommodating vertical suspension travel, ensuring accurate front-wheel toe alignment, crisp steering response, and directional stability under heavy commercial payloads.

    Heavy-duty commercial trucks carry immense front axle loads that place extreme lateral and torsional stresses on steering linkage joints during tight cornering, braking, and rough-road maneuvering. The FAW Jiefang left tie rod end ball joint 3003055-1H acts as the vital articulating pivot connecting the cross-steering tie rod to the left front wheel spindle arm.

    As the driver turns the steering wheel, the steering box and drag link push or pull the steering knuckle, transferring synchronized turning motion across the front axle via the tie rod. Inside the 3003055-1H housing, the spherical ball stud rotates and pivots smoothly within a low-friction bearing seat. This multi-axis articulation allows the front wheels to turn in exact Ackermann steering geometry while absorbing upward and downward leaf-spring/air-suspension movement without binding, preventing steering wander and minimizing front tire scrubbing.

    Heavy-Duty Forged Metallurgy & Sealing Engineering

    Front axle steering ball joints operate continuously under severe shock loads, high cyclic friction, water splash, mud, and abrasive road grit:

    • Drop-Forged 40Cr Alloy Steel Housing & Ball Stud: Manufactured from high-tensile, heat-treated 40Cr structural alloy steel with induction-hardened ball pin surfaces to resist bending, shearing, and impact fracture under heavy off-road or highway loads.

    • Mirror-Polished Spherical Ball Pin & Wear-Resistant Seat: Precision-ground ball stud paired with a high-load polymer/sintered-metal bearing cup to minimize rotational torque, eliminate free play, and extend service life.

    • Heavy-Duty Chloroprene (CR) Dust Boot: Outfitted with a flexible, tear-resistant rubber dust boot secured by spring-steel retaining rings to lock in high-pressure lithium grease while blocking water, mud, and road salt ingress.

    • Precision Left-Hand Threading & Slotted Castle Nut: Features CNC-rolled left-hand adjustment threads on the shank for exact toe-in calibration, complete with a slotted castle nut and cotter pin for vibration-proof mechanical locking.

    Fleet Troubleshooting & Tie Rod End Failure Diagnostics

    A worn or loose left tie rod end creates dangerous steering play, causes front-end shimmy, and rapidly destroys expensive front steer tires. Fleet mechanics and alignment technicians should inspect or replace the 3003055-1H left tie rod end ball joint upon detecting:

    1. Excessive Steering Wheel Free Play or Wandering: Delayed steering response or constant driver correction needed to keep the truck tracking straight on highways due to internal ball-socket wear.

    2. Clunking or Knocking Noises When Turning: Sharp metallic clunks heard from the front left wheel area when turning the steering wheel stationary or driving over bumps.

    3. Rapid, Feathered, or Uneven Front Tire Wear: Severe inner or outer tread feathering caused by dynamic front-wheel toe-out/toe-in shifts under load.

    4. Torn Dust Boot or Grease Leakage: Split, cracked, or missing rubber boot allowing grease loss and accelerated rust pitting inside the ball joint socket.

    Technical Specifications & Parameter Matrix

    Parameter Specification
    Product Name FAW Jiefang J6 Aowei Left Tie Rod End Ball Joint / Steering Tie Rod Joint
    Part Number / OEM No. 3003055-1H
    Vehicle Brand & Application FAW Jiefang J6 & Aowei Heavy Commercial Trucks, Dumpers & Tractors
    Fitment Position Front Axle Steering Tie Rod — Left Side (LH)
    System Category Heavy Truck Front Axle Steering Linkage System
    Product Purpose Fleet Steering Maintenance, Alignment Overhaul & Repair (replace/repair)
    Product Condition 100% Brand-New OEM Standard (New)
    Quality Standard Fully Guaranteed OEM Standard
    Place of Origin Shandong, China
    Minimum Order Quantity (MOQ) 1 Piece (Sample Orders & Bulk Wholesale Supported)
    Single Package Size 30 x 20 x 20 cm
    Single Gross Weight 5.0 kg
    Standard Packaging Protective Export Neutral Carton Box
    Payment Terms T/T (30% Deposit, Balance prior to dispatch), Western Union
    Delivery Lead Time Fast Dispatch within 3 to 7 Days

    Best Practices for Installation & Front-End Alignment

    To ensure safe steering lock, proper lubrication, and extended tire life after replacing the tie rod end:

    • Count Exposed Threads During Removal: Count the exact number of exposed threads on the tie rod tube before unscrewing the old joint so the new 3003055-1H left tie rod end can be threaded in to the approximate factory toe setting.

    • Torque Castle Nut & Install New Cotter Pin: Tighten the ball stud castle nut to factory torque specifications and insert a brand-new cotter pin; never loosen the nut backward to align the cotter pin slot—always tighten slightly forward until aligned.

    • Grease Joint & Perform Professional Wheel Alignment: Inject fresh heavy-duty EP2 lithium grease through the zerk fitting until the boot firms up, then perform a complete front axle toe-in alignment before returning the vehicle to commercial service.

    Frequently Asked Questions (FAQ)

    Q1: Is part number 3003055-1H specifically for the left-hand side of FAW Jiefang J6 and Aowei trucks?Answer: Yes, 3003055-1H is the OEM-standard left-hand (LH) tie rod end ball joint engineered with matching taper dimensions and left-hand shank threads for FAW Jiefang J6 and Aowei heavy-duty steering systems.

    Q2: Does the 3003055-1H tie rod end come pre-greased with a grease fitting and castle nut?Answer: Yes, each unit arrives pre-lubricated at the factory and includes the grease zerk fitting, protective dust boot, slotted castle nut, and cotter pin ready for installation.

    Q3: How is this 5.0 kg forged ball joint packaged for international shipping?Answer: Each 5.0 kg steering joint is fitted with a protective plastic cap over the ball stud and dust boot, sealed in anti-rust poly wrap, and packed inside a reinforced 30x20x20 cm export carton box with internal cushioning to prevent thread or boot damage during transit.

    Q4: What payment terms and delivery schedules are available for overseas buyers?Answer: We accept secure B2B payments via T/T (30% deposit) and Western Union, with stocked warehouse inventory ready for fast global dispatch via air express, air cargo, or ocean freight.

    Packaging, Logistics & B2B Procurement

    • Protective Export Neutral Packaging: Encased inside a sturdy 30x20x20 cm export carton box (5.0 kg gross weight) with protective thread/boot caps and internal cushioning to safeguard precision ball studs and threads during transport.

    • Fast Global Dispatch Logistics: In-stock for rapid order processing, with international shipping ready via air express couriers, air cargo, or containerized sea freight.

    • Flexible B2B Procurement: Low minimum order quantity starting from 1 piece accommodates urgent single-truck repairs, supported by volume distributor pricing via standard T/T (30% deposit) and Western Union payment options.

    WG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light Switch

    Send Inquiry
    Contact Info
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept