Heavy-duty commercial diesel engines consume thousands of liters of ambient air per minute, making thorough particulate separation essential for maintaining engine compression, fuel economy, and turbocharger longevity. The FAW JH6 air filter assembly 1109010-1600/A utilizes a high-efficiency two-stage filtration architecture within a rugged housing.
As raw ambient air enters the tangential intake port, internal guide vanes induce a high-velocity cyclonic swirl inside the outer canister. Centrifugal force flings heavy dust particles, sand, and water droplets outward against the housing wall, ejecting them down through the rubber dust evacuator valve before they ever reach the filter media. In the second stage, pre-cleaned air passes radially inward through the high-capacity K2652 / KT2652 pleated main filter element and secondary safety element, trapping fine sub-micron contaminants while maintaining low intake airflow restriction for optimal turbocharger boost response.
Chassis-mounted heavy-duty air cleaner assemblies operate continuously under extreme road vibration, dusty construction/mining environments, rain splash, and engine bay thermal radiation:
Heavy-Gauge Steel / High-Impact Polymer Housing Canister: Precision-formed outer shell finished with corrosion-resistant powder coating (or UV-stabilized reinforced composite) to resist stone impacts, structural fatigue, and atmospheric rust.
High-Efficiency Pleated Cellulose/Synthetic Filter Media (K2652): Deep-pleated, resin-impregnated filter paper engineered with uniform pleat spacing to maximize dust-holding capacity, resist moisture softening, and achieve over 99.9% filtration efficiency.
Dual-Element Primary & Inner Safety Cartridge Design: Includes both the main outer filter element and an inner safety backup cartridge that prevents debris from entering the turbocharger intake during primary element servicing.
Airtight Polyurethane End Caps & Heavy-Duty Latches: Molded flexible polyurethane seals lock tightly against the housing sealing flange, secured by heavy-duty toggle latches and a built-in restriction indicator port to guarantee zero unfiltered air bypass.
A clogged, damaged, or leaking air filter assembly starves the engine of combustion air or allows abrasive grit to enter the intake tract, leading to rapid turbocharger and engine failure. Fleet mechanics and maintenance technicians should inspect or replace the 1109010-1600/A air filter assembly upon detecting:
Loss of Engine Power & Black Exhaust Smoke: Sluggish acceleration and excessive black smoke under load caused by severe filter restriction reducing air-to-fuel ratios.
Elevated Fuel Consumption & Dashboard Air Restriction Warning: Tripped vacuum restriction indicator or increased diesel consumption resulting from high intake airflow resistance.
Damaged Housing, Cracked Intake Neck, or Broken Latches: Physical impact damage, warped cover rims, or missing clamp latches allowing unfiltered dusty air to bypass the element.
Dust Accumulation Inside Clean-Air Outlet Pipe: Fine dust residue detected downstream of the filter outlet, signaling torn filter media, collapsed end-cap seals, or a missing inner safety element.
| Parameter | Specification |
| Product Name | FAW JH6 Air Filter Assembly / Heavy-Duty Air Cleaner Housing & Element |
| Part Number / OE NO. | 1109010-1600/A |
| Filter Element Size / Spec | KT2652 / K2652 |
| Vehicle Brand & Truck Model | FAW Jiefang JH6 & J6P Heavy Commercial Trucks, Dumpers & Tractors |
| System Category | Heavy-Duty Diesel Engine Air Intake & Filtration System (Type: Air Filter Assy) |
| Product Purpose | Fleet Engine Intake Maintenance, Assembly Replacement & Repair (replace/repair) |
| Product Condition | 100% Brand-New OEM Standard (New) |
| Quality Standard | Fully Guaranteed OEM Standard |
| Place of Origin | Shandong, China |
| Minimum Order Quantity (MOQ) | 1 Piece (Sample Orders & Bulk Wholesale Supported) |
| Single Package Size | 60 x 40 x 40 cm |
| Single Gross Weight | 45.0 kg |
| Standard Packaging | Heavy-Duty Neutral Export Carton Box |
| Payment Terms | T/T (Telegraphic Transfer), Western Union, PayPal |
| Delivery Lead Time | Fast Dispatch within 2 to 5 Days |
To guarantee 100% dust-free intake air sealing and maximum engine protection after installation:
Inspect Clean-Air Ducts & Turbocharger Clamps: Thoroughly wipe down the clean-side outlet duct and inspect all silicone hump hoses and heavy-duty T-bolt clamps between the 1109010-1600/A air filter assembly and the turbocharger inlet to eliminate any vacuum leaks.
Verify Rubber Dust Evacuator Valve Orientation: Ensure the bottom rubber duckbill dust evacuator valve is oriented downward and free of obstructions so cyclonic dust and moisture can discharge freely.
Reset Air Filter Restriction Indicator: After mounting the assembly and securing all cover latches evenly, reset the mechanical or electronic air restriction sensor on the outlet neck to ensure accurate future service monitoring.
Q1: Does part number 1109010-1600/A come as a complete air filter assembly with the K2652 / KT2652 elements?Answer: Yes, 1109010-1600/A is supplied as a complete ready-to-install air cleaner assembly—including the outer canister housing, end cover, latches, dust evacuator valve, and internal KT2652 / K2652 filter element(s).
Q2: Is this air filter assembly compatible with both FAW JH6 and J6P heavy trucks?Answer: Yes, 1109010-1600/A is manufactured to OEM specifications for FAW Jiefang JH6 and J6P commercial vehicles, matching original chassis mounting bracket spacing and intake/outlet duct diameters.
Q3: How is this 45.0 kg heavy-duty air filter assembly packaged for international freight?Answer: Each 45.0 kg assembly is sealed with protective dust caps over the inlet/outlet ports, wrapped in moisture-resistant protective film, and packed inside a reinforced 60x40x40 cm heavy-duty neutral export carton box with internal shock-absorbing bracing to prevent housing dents during transit.
Q4: What payment methods and dispatch lead times are available for overseas B2B orders?Answer: We accept secure B2B payments via T/T, Western Union, and PayPal, with stocked warehouse inventory ready for fast international dispatch within 2 to 5 days via air cargo or containerized ocean freight.
Protective Heavy Export Packaging: Encased inside a reinforced 60x40x40 cm neutral export carton box (45.0 kg gross weight) with protective port covers and internal cushioning to safeguard the outer housing canister, latches, and internal filter elements during transit.
Fast Global Dispatch Logistics: In-stock for rapid order processing, with international shipping ready within 2 to 5 days via air express cargo or LCL/FCL containerized ocean freight.
Flexible B2B Procurement: Low minimum order quantity starting from 1 piece accommodates urgent fleet repairs, supported by competitive volume distributor pricing via standard T/T, Western Union, and PayPal payment options.



Address
Lemeng Apartment, Jingshi Road, Huaiyin District, Jinan City, Shandong Province
Tel

