Commercial heavy-duty trucks operating across winter routes, high-altitude passes, and humid climates require reliable, high-volume cabin air circulation to prevent windshield fogging and maintain comfortable cab temperatures. The FAW J6P warm air motor and impeller assembly 8101045-A65-C00/A serves as the primary electromechanical air-moving unit within the cab HVAC ducting system.
When the driver selects fan speed settings on the dashboard climate control panel, regulated 24V DC electrical current energizes the copper armature windings inside the motor housing. Electromagnetic torque spins the precision-mounted centrifugal squirrel-cage impeller at calibrated speeds. Curved impeller blades draw air axially into the center of the fan wheel and accelerate it radially outward through the scroll housing, forcing pressurized airflow across the hot coolant heater core and through directional air ducts to the windshield defroster, instrument panel vents, and footwells.
Dashboard HVAC blower assemblies operate continuously for thousands of hours under varying electrical loads, dust exposure, and cab vibration:
High-Torque Copper-Wound 24V DC Motor: Constructed with pure enameled copper armature coils, high-density silicon steel laminations, and wear-resistant carbon brushes to deliver strong rotational torque, low heat generation, and extended service life.
Dynamically Balanced Squirrel-Cage Impeller: Molded from high-strength, glass-fiber-reinforced ABS/polypropylene composite and precision-balanced with factory counterweights to eliminate dashboard vibration, humming, and bearing side-load wear.
Self-Lubricating Sintered Bronze / Ball Bearings: Outfitted with sealed, low-friction shaft bearings packed with wide-temperature synthetic grease to ensure quiet, smooth startup even in sub-zero winter conditions.
Vented Heat-Dissipating Housing & OEM Plug Connector: Features integrated cooling air passages to prevent motor overheating during continuous high-speed operation, complete with a factory-matched locking electrical connector for plug-and-play installation.
A weak, noisy, or seized warm air blower assembly compromises windshield defrosting safety, reduces cab heating/cooling output, and can overload blower speed resistors. Fleet mechanics and electrical technicians should inspect or replace the 8101045-A65-C00/A warm air motor and impeller assembly upon detecting:
No Airflow from Cab or Defroster Vents: Blower motor failing to spin on any fan speed setting due to worn-out carbon brushes, a burnt armature winding, or a seized motor shaft bearing.
Loud Squealing, Chirping, or Dashboard Vibration: High-pitched bearing screech or rhythmic dashboard shaking at medium-to-high fan speeds caused by dry shaft bearings, cracked impeller blades, or an unbalanced fan wheel.
Weak Airflow or Intermittent Motor Operation: Sluggish fan rotation or motor cutting out over bumps, indicating worn commutator segments or high internal brush resistance.
Blown HVAC Fuses or Overheated Blower Resistor: Excessive electrical current draw caused by mechanical drag inside a failing blower motor bearing.
| Parameter | Specification |
| Product Name | FAW J6P Warm Air Motor and Impeller Assembly / Cab Heater Blower Motor |
| Part Number / Model Number | 8101045-A65-C00/A |
| Vehicle Brand & Model Compatibility | FAW Jiefang J6P Heavy Commercial Trucks, Dumpers & Tractors |
| System Category | Commercial Truck Cab HVAC, Heating & Windshield Defrosting System |
| Product Purpose | Fleet Cab Climate Control Maintenance, Motor Replacement & Repair (replace/repair) |
| Product Condition | 100% Brand-New OEM Standard (New) |
| Warranty Coverage | 6 Months Manufacturer Warranty |
| Quality Standard | Fully Guaranteed OEM Standard |
| Place of Origin | Shandong, China |
| Minimum Order Quantity (MOQ) | 1 Piece (Sample Orders & Bulk Wholesale Supported) |
| Single Package Size | 18 x 18 x 15 cm |
| Single Gross Weight | 3.0 kg |
| Standard Packaging | Protective Neutral Export Carton Box with Foam Cushioning |
| Payment Terms | T/T (Telegraphic Transfer), Western Union, PayPal, MoneyGram |
| Delivery Lead Time | Fast Dispatch within 3 to 7 Days |
To ensure quiet blower operation and prevent electrical overload after replacing the motor and impeller assembly:
Clear Debris from HVAC Air Box & Cabin Filter: Before installing the new 8101045-A65-C00/A assembly, inspect the evaporator/heater housing for leaves, paper, or dust buildup and replace a clogged cabin air filter to prevent impeller blade damage and airflow restriction.
Inspect Blower Speed Resistor & Wiring Connector: Check the dashboard wiring harness plug and blower speed resistor for heat discoloration or loose terminals, as a dragging old motor often damages resistor contacts.
Verify Free Impeller Rotation Before Final Fastening: After seating the motor flange into the HVAC housing and tightening the mounting screws evenly, test all fan speed settings to verify smooth, rattle-free airflow across defrost and cabin vents.
Q1: Does part number 8101045-A65-C00/A include both the electric motor and the impeller fan wheel?Answer: Yes, 8101045-A65-C00/A is supplied as a complete factory-balanced assembly—including the 24V electric blower motor, mounting flange, electrical connector, and pre-installed centrifugal impeller wheel—ready for direct installation.
Q2: Is this warm air motor assembly a direct fit for FAW J6P trucks?Answer: Yes, 8101045-A65-C00/A is manufactured to exact OEM specifications, matching original mounting bolt hole spacing, housing depth, impeller diameter, and wiring plug configuration for FAW Jiefang J6P commercial trucks.
Q3: How is this 3.0 kg motor and impeller assembly packaged for international shipping?Answer: Each 3.0 kg unit is sealed in an anti-moisture poly bag and supported inside a sturdy 18x18x15 cm neutral export carton box with custom foam cushioning to protect the delicate impeller blades and electrical plug from crushing during transit.
Q4: What warranty, payment methods, and delivery lead times apply to B2B orders?Answer: Every unit is backed by a 6 Months Manufacturer Warranty. We accept secure B2B payments via T/T, Western Union, PayPal, and MoneyGram, with stocked inventory ready for fast global dispatch within 3 to 7 days via air express, air cargo, or ocean freight.
Protective Export Neutral Packaging: Encased inside a sturdy 18x18x15 cm neutral export carton box (3.0 kg gross weight) with custom internal foam inserts to protect the balanced impeller blades, motor shaft, and wiring connector during transit.
Fast Global Dispatch Logistics: In-stock for rapid order processing, with international shipping ready within 3 to 7 days via air express couriers, air cargo, or containerized ocean freight.
Flexible B2B Procurement: Low minimum order quantity starting from 1 piece accommodates urgent single-truck repairs, supported by competitive volume distributor pricing via secure T/T, Western Union, PayPal, and MoneyGram payment options



Address
Lemeng Apartment, Jingshi Road, Huaiyin District, Jinan City, Shandong Province
Tel

