| Parameter | Specification |
| Product Name | FAW 380HP V Thrust Rod / Heavy-Duty Rear Suspension V-Stay Torque Rod Assembly |
| Part Number / Model Number | 2919005-242 |
| Vehicle Brand & Truck Compatibility | FAW Jiefang 380HP Series Heavy-Duty 6x4 Commercial Trucks, Tractors & Dumpers |
| Primary Structural Material | High-Tensile Drop-Forged Alloy Steel (Steel) |
| System Category | Heavy-Duty Commercial Vehicle Rear Tandem Axle Suspension & Axle-Location System |
| Product Purpose | Fleet Suspension Maintenance, V-Stay Replacement & Chassis Repair (replace/repair) |
| Product Condition | 100% Brand-New OEM Standard (New) |
| Warranty Coverage | 3 Months Manufacturer Warranty |
| Quality Standard | Fully Guaranteed, Fatigue- & Bushing-Load Tested OEM Standard |
| Place of Origin | Shandong, China |
| Minimum Order Quantity (MOQ) | 1 Piece (Sample Trial Orders & Bulk Wholesale Supported) |
| Single Package Size | 75 x 55 x 20 cm |
| Single Gross Weight | 45.0 kg |
| Standard Packaging | Anti-Rust Protective Coating, Bushing Thread Guards & Export Wooden Pallet / Crate Packaging |
| Payment Terms | T/T (Telegraphic Transfer), Westunion (Western Union), PayPal, MoneyGram |
| Delivery Lead Time | Fast Dispatch within 3 to 7 Days |
Direct Factory Wholesale & Flexible MOQ: Sourced directly from our Shandong OEM supply base to eliminate middleman markups, offering competitive tiered wholesale pricing for distributor bulk orders alongside a 1-piece MOQ for urgent fleet suspension repairs or sample evaluation.
Heavy-Duty Export Packaging: Each 45.0 kg steel V thrust rod (75 x 55 x 20 cm unit footprint) is finished with corrosion-resistant industrial enamel, fitted with protective caps over the tapered/threaded ball-pin ends, and securely strapped onto reinforced export pallets or crates for safe sea and air freight handling.
Fast Global Dispatch & Multi-Modal Freight: Ready-to-ship warehouse stock enables fast order fulfillment within 3 to 7 days, supporting urgent air cargo dispatch for grounded fleet trucks as well as LCL/FCL ocean container consolidation alongside full-line FAW Jiefang, Sinotruk, and Shacman lower torque rods, balance shaft assemblies, leaf springs, and suspension bushings.
Flexible International Trade Terms: Supports standard B2B procurement workflows with T/T, Western Union, PayPal, and MoneyGram payment options, complete with commercial invoices, packing lists, and export customs documentation.
Heavy-duty 6x4 tractors and mining dumpers generate enormous rotational torque during uphill acceleration and emergency braking, alongside high lateral cornering forces across uneven terrain. The FAW 380HP V thrust rod 2919005-242 forms the triangulated upper link connecting the top of the differential carrier housing (apex ball joint) to both left and right chassis frame crossmembers (two frame-end eye bushings).
Unlike straight lower torque rods that only resist fore-and-aft axle movement, the V-shaped geometry of the 2919005-242 thrust rod stabilizes the drive axle in two planes simultaneously: it counteracts axle housing wind-up (pinion angle twist) during high-torque launches and heavy braking while eliminating side-to-side lateral axle shift. Simultaneously, its high-load elastomeric/molecular ball joints articulate smoothly to allow unrestricted vertical suspension travel and cross-axle articulation over rough haul roads.
Rear suspension V-stay rods carry some of the highest cyclic shock, tensile, and compressive loads on a commercial truck chassis:
Drop-Forged High-Tensile Alloy Steel Arms & Apex Housing: Forged from structural alloy steel and heat-treated to eliminate weld-seam fatigue cracks, bending, or apex collar deformation under 40+ ton off-road shock loads.
Vulcanized Natural-Rubber / Polyurethane High-Load Bushings: High-density, tear-resistant elastomer bushings bonded under compression to outer steel sleeves and inner forged pins—absorbing high-frequency road shock while resisting tearing, extrusion, and oil degradation.
Hardened Forged Steel Ball Pins & Tapered Mounting Bosses: Induction-hardened trunnion pins machined to exact OEM center-to-center length and bolt-hole spacing for drop-in alignment onto the axle differential bracket and chassis frame rails.
Anti-Corrosion Industrial Protective Coating: Durable black electrophoretic / enamel finish protects the forged steel body against mud, moisture, and road-salt oxidation.
Worn bushings, loose mounting pins, or a bent V thrust rod cause rear axle misalignment, rapid tire scrubbing, and driveline vibration. Fleet workshop mechanics and chassis technicians should inspect or replace the 2919005-242 V thrust rod upon detecting:
Loud Metallic Clunking or Thudding When Shifting Gears or Braking: Severely torn or extruded rubber bushings allowing the steel inner pin to slam against the outer housing during torque reversals.
Truck "Dog-Tracking" & Rapid, Uneven Rear Tire Shoulder Wear: Lateral axle shift caused by collapsed V-stay bushings or a bent forged arm throwing the rear drive axles out of thrust-angle alignment.
Driveline Vibration & Premature U-Joint / Carrier Bearing Failure: Excessive axle housing wind-up altering the driveshaft pinion working angle under load.
Elongated Frame Bracket Holes or Cracked Apex Weld/Forging: Loose mounting fasteners hammering the chassis crossmember brackets or structural stress fractures near the central apex joint.
To preserve axle thrust alignment and prevent premature bushing torsional tearing when installing the 2919005-242 V thrust rod:
Support Chassis Safely & Clean Mounting Brackets: Chock the front wheels, support the rear frame securely on heavy-duty jack stands, and inspect both the differential top mounting pad and chassis frame brackets for elongated bolt holes or rust buildup before fitting the 2919005-242 V thrust rod.
Install New High-Tensile Grade 10.9 Mounting Bolts & Locknuts: Never reuse stretched or corroded suspension bolts; apply anti-seize lightly to the pin shanks (keeping grease off rubber bushing faces) and align all three mounting points without forcing the arms.
Torque Fasteners at Normal Curb Ride Height: Snug the mounting bolts during assembly, lower the truck so full chassis weight rests on the suspension at normal ride height, and then torque all apex and frame-end fasteners to FAW OEM torque specifications—preventing pre-twisted rubber bushing preload and maximizing service life.
Q1: Which truck model is part number 2919005-242 engineered for?Answer: Part number 2919005-242 is an OEM-standard steel V thrust rod (V-stay torque rod assembly) engineered specifically for FAW Jiefang 380HP heavy-duty commercial trucks, tractors, and dumpers.
Q2: Does the 2919005-242 V thrust rod come pre-assembled with bushings?Answer: Yes, it is supplied as a complete factory-pressed forged steel V thrust rod assembly with heavy-duty bushings pre-installed at both frame ends and the central axle apex joint ready for direct installation.
Q3: How is this 45.0 kg heavy-duty V thrust rod packaged for international shipping?Answer: Each 45.0 kg steel assembly (75 x 55 x 20 cm unit dimensions) is coated with anti-rust protection, fitted with protective caps on mounting pins, and strapped securely onto reinforced export pallets or wooden crates for safe ocean or air freight handling.
Q4: What are the MOQ, warranty coverage, payment terms, and delivery lead times for B2B buyers?Answer: We support flexible procurement starting from a 1-piece MOQ up to bulk container orders. Every unit includes a 3-month warranty, with payments accepted via T/T, Western Union, PayPal, and MoneyGram, and dispatch completed within 3 to 7 days from Shandong, China.
Part Number / Model: 2919005-242
Description: FAW 380HP V Thrust Rod (Forged Steel Rear Suspension V-Stay Torque Rod Assembly)
Availability: Stock Ready for Fast Dispatch (3–7 Days)
MOQ: 1 Piece (Competitive Wholesale Tier Pricing Available for Bulk Fleet Orders)



Address
Lemeng Apartment, Jingshi Road, Huaiyin District, Jinan City, Shandong Province
Tel

