Products
FAW J6 Left Front Combination Lamp Assembly 3711015-59A/C
  • FAW J6 Left Front Combination Lamp Assembly 3711015-59A/CFAW J6 Left Front Combination Lamp Assembly 3711015-59A/C
  • FAW J6 Left Front Combination Lamp Assembly 3711015-59A/CFAW J6 Left Front Combination Lamp Assembly 3711015-59A/C
  • FAW J6 Left Front Combination Lamp Assembly 3711015-59A/CFAW J6 Left Front Combination Lamp Assembly 3711015-59A/C
  • FAW J6 Left Front Combination Lamp Assembly 3711015-59A/CFAW J6 Left Front Combination Lamp Assembly 3711015-59A/C

FAW J6 Left Front Combination Lamp Assembly 3711015-59A/C

Model:3711015-59A/C
The FAW J6 Left Front Combination Lamp Assembly 3711015-59A/C is an OEM-standard, 24V heavy-duty front headlight and signaling module engineered specifically for the left-hand (LH / driver-side) front cab position of FAW Jiefang J6 commercial trucks, long-haul tractors, and heavy dumpers. Supplied directly from Shandong, China—the core manufacturing and export hub for FAW Jiefang cabin body and exterior lighting spare parts—this integrated multi-function headlamp assembly combines high/low beam projector/reflector optics, daytime running/position lights, and amber front turn signal indicators into a single weather-sealed chassis module. International B2B buyers, commercial fleet collision workshops, and regional spare parts distributors can request a wholesale quotation (RFQ) starting from a 1-piece sample trial order up to bulk master-carton or palletized container wholesale procurement, backed by a 12-month warranty and 7 to 15 days global dispatch.

    Parameter Specification
    Product Name FAW J6 Left Front Combination Lamp Assembly / LH Headlight & Turn Signal Module
    Part Number / Model Number 3711015-59A/C
    Vehicle Brand & Truck Compatibility FAW Jiefang J6 Series Heavy-Duty Commercial Trucks, Tractors & Dumpers
    Fitment Position Front Cab Bumper / Fascia — Left-Hand Side (LH)
    System Category Heavy-Duty Commercial Vehicle 24V Forward Illumination & Front Signaling System
    Product Purpose Fleet Collision Repair, Headlight Replacement & Lighting Maintenance (replace/repair)
    Product Condition 100% Brand-New OEM Standard (New)
    Warranty Coverage 12 Months Manufacturer Warranty
    Quality Standard Fully Guaranteed, Photometric-Tested OEM Standard
    Place of Origin Shandong, China
    Minimum Order Quantity (MOQ) 1 Piece (Sample Trial Orders & Bulk Wholesale Supported)
    Single Package Size 55 x 35 x 25 cm
    Single Gross Weight 8.0 kg
    Standard Packaging Molded Foam-Cushioned Neutral Export Carton Box / Palletized Master Export Packaging
    Payment Terms T/T (Telegraphic Transfer), Western Union, PayPal, MoneyGram
    Delivery Lead Time Reliable Dispatch within 7 to 15 Days

    Packaging, Logistics & B2B Wholesale Procurement

    • Direct Factory Wholesale & Flexible MOQ: Sourced directly from our Shandong OEM supply base to eliminate middleman markups, offering competitive tiered wholesale pricing for distributor bulk orders alongside a 1-piece MOQ for urgent collision repair workshops or quality sample evaluation.

    • Export-Ready Shock- & Scratch-Resistant Packaging: Each 8.0 kg front combination lamp assembly is wrapped in anti-scratch protective film over the optical polycarbonate lens, cradled inside custom-molded high-density EPE foam inserts to protect mounting tabs and adjuster screws, and packed in a heavy-duty 55 x 35 x 25 cm export carton box (consolidated onto wooden pallets for FCL/LCL sea freight).

    • Global Freight & Multi-Part Consolidation: Scheduled order fulfillment within 7 to 15 days, supporting urgent air freight dispatch for grounded fleet trucks as well as LCL/FCL ocean container consolidation alongside full-line FAW Jiefang, Sinotruk, and Shacman cab panels, bumpers, mirrors, and electrical spare parts.

    • Flexible International Trade Terms: Supports standard B2B procurement workflows with T/T, Western Union, PayPal, and MoneyGram payment options, complete with commercial invoices, packing lists, and export customs clearance documentation.

    Operating Mechanics & Multi-Beam Forward Optical Dynamics

    Long-haul commercial trucks operating across unlit highways, mountain passes, and construction corridors rely on precise forward beam projection to detect road hazards early without blinding oncoming traffic. The FAW J6 left front combination lamp assembly 3711015-59A/C integrates all primary front-left road illumination and directional signaling functions into one unified aerodynamic housing.

    When the driver activates the 24V headlamp switch or steering column stalk, electrical power routes through the factory multi-pin waterproof connector to energize the internal low-beam, high-beam, position/DRL, and amber turn signal circuits. Computer-designed vacuum-aluminized multi-surface reflectors and precision optical lenses shape a sharp horizontal cut-off beam pattern for dipped low-beam driving, a long-throw penetrating beam for high-beam highway travel, and wide-angle amber flashing visibility for safe lane changes and intersections.

    Heavy-Duty Optical Engineering & Weather-Sealed Housing Construction

    Front cab-mounted headlamps face the harshest aerodynamic and environmental exposure on a commercial truck, enduring high-speed gravel impacts, torrential rain, intense solar UV radiation, and continuous cab-over-engine vibration:

    • Impact- & UV-Resistant Polycarbonate (PC) Outer Lens: Hard-coated automotive-grade polycarbonate front lens engineered to resist stone-chip pitting, hazing, and UV yellowing over years of continuous highway sun exposure.

    • High-Reflectivity Vacuum-Aluminized Reflector Bowls: Precision-molded thermoset/BMC high-heat reflector chambers coated with mirror-finish vapor-deposited aluminum to withstand continuous bulb heat without warping or dulling.

    • Reinforced PP/ABS Back Housing & Heavy-Duty Mounting Brackets: High-rigidity structural rear housing equipped with reinforced OEM mounting bosses and accessible vertical/horizontal beam-aiming adjuster screws.

    • Hermetic Hot-Melt Butyl Seal & Gore-Tex Breathable Vents: Continuous perimeter lens-to-housing adhesive seal paired with hydrophobic breather membranes and rubber dust boots to prevent water ingress, mud contamination, and internal lens condensation.

    Fleet Troubleshooting & Front Combination Lamp Failure Diagnostics

    A cracked, fogged, or misaligned front combination lamp severely reduces night-driving visibility and causes commercial vehicle safety inspection failures. Fleet maintenance technicians and collision repair specialists should inspect or replace the 3711015-59A/C left front lamp assembly upon detecting:

    1. Cracked, Shattered, or Deeply Pitted Outer Lens: Collision impact or highway rock strikes compromising optical beam focus and allowing rainwater into the lamp housing.

    2. Severe Internal Moisture Condensation or Reflector Peeling: Failed perimeter seal or damaged rear dust cap allowing humidity to corrode the vacuum-aluminized reflector surface and short out internal wiring.

    3. Broken Mounting Tabs or Stripped Beam-Aiming Adjusters: Impact damage causing the headlamp housing to vibrate excessively or preventing proper vertical/horizontal headlight aim calibration.

    4. Melted Internal Socket Holders or Intermittent Circuit Operation: Electrical overheating or corroded multi-pin connector terminals causing flickering low/high beams or turn signal failure.

    Best Practices for Installation & Front Lighting Servicing

    To guarantee proper beam alignment and long-term moisture resistance when installing the 3711015-59A/C left front combination lamp:

    • Verify Left-Hand (LH) Fitment & Inspect Cab Mounting Frame: Confirm part number 3711015-59A/C is installed on the left-hand (LH) front position of the FAW J6, and check that underlying bumper or cab support brackets are straight following any collision repair so the housing is not stressed when bolted down.

    • Check Wiring Harness Connector & Rear Rubber Dust Boots: Inspect the vehicle's 24V front harness plug for corrosion, apply dielectric grease to the connector seal, and verify all rear access dust caps are seated tightly before installation.

    • Calibrate Headlight Beam Aim After Installation: Park the unloaded truck on a level surface facing an alignment screen or wall and adjust the vertical and horizontal aiming screws to FAW J6 photometric specifications so the low-beam cut-off illuminates the road without glaring oncoming drivers.

    Frequently Asked Questions (FAQ)

    Q1: Which side of the FAW J6 truck does part number 3711015-59A/C fit?Answer: Part number 3711015-59A/C is engineered specifically for the Left-Hand (LH) front position of FAW Jiefang J6 commercial trucks and tractors.

    Q2: What warranty coverage is provided with the 3711015-59A/C front combination lamp?Answer: This product is backed by a comprehensive 12-Month Manufacturer Warranty, guaranteeing OEM fitment, optical clarity, and weather-sealed housing integrity.

    Q3: How is this 8.0 kg front lamp assembly packaged to prevent lens or bracket damage during export?Answer: Each 8.0 kg headlamp unit is covered with protective lens film, cushioned inside custom-molded shock-absorbing foam inserts, and packed in a heavy-duty 55 x 35 x 25 cm export carton box designed for safe international air cargo or palletized ocean freight.

    Q4: What are the MOQ, payment terms, and delivery lead times for B2B wholesale buyers?Answer: We support flexible procurement starting from a 1-piece MOQ up to bulk distributor orders. We accept T/T, Western Union, PayPal, and MoneyGram, with international dispatch completed within 7 to 15 days from Shandong, China.


    WG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light Switch

    Send Inquiry
    Contact Info
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept