| Parameter | Specification |
| Product Name | FAW J6 Lower Steering Drive Shaft Assembly / Intermediate Telescopic Steering Shaft |
| Part Number / Model Number | 3404092A1057 |
| Vehicle Brand & Truck Compatibility | FAW Jiefang J6 Series Heavy-Duty Commercial Trucks, Tractors & Dumpers |
| System Category | Heavy-Duty Commercial Vehicle Steering Column & Mechanical Linkage System |
| Product Purpose | Fleet Steering Maintenance, U-Joint/Shaft Replacement & Chassis Repair (replace/repair) |
| Product Condition | 100% Brand-New OEM Standard (New) |
| Quality Standard | Fully Guaranteed, Zero-Play Torque & Runout Tested OEM Standard |
| Place of Origin | Shandong, China |
| Minimum Order Quantity (MOQ) | 1 Piece (Sample Trial Orders & Bulk Wholesale Supported) |
| Single Package Size | 45 x 15 x 15 cm |
| Single Gross Weight | 8.0 kg |
| Standard Packaging | Protective Anti-Rust Wrapping / Nude Export Packing (Carton/Pallet Consolidation Available) |
| Payment Terms | T/T (30% Deposit, 70% Balance Before Shipment), Western Union |
| Delivery Lead Time | Fast Dispatch within 7 Days |
Direct Factory Wholesale & Flexible MOQ: Sourced directly from our Shandong OEM supply base to eliminate middleman markups, offering competitive tiered wholesale pricing for distributor bulk orders alongside a 1-piece MOQ for urgent fleet steering repairs or sample evaluation.
Export-Ready Protective Packaging: Each 8.0 kg lower steering drive shaft assembly (45 x 15 x 15 cm unit footprint) is coated with anti-corrosion oil over the splined yokes and telescopic slip shaft, wrapped in protective film per standard nude export packing specifications, and bundled securely into export cartons or wooden crates/pallets for damage-free international transit.
Fast Global Dispatch & Multi-Modal Freight: Ready-to-ship warehouse stock enables fast order fulfillment within 7 days, supporting urgent air cargo dispatch for grounded fleet trucks as well as LCL/FCL ocean container consolidation alongside full-line FAW Jiefang, Sinotruk, and Shacman power steering pumps, steering gear boxes, tie rods, and drag links.
Standardized International Trade Terms: Supports transparent B2B procurement workflows with T/T (30% deposit) and Western Union payment options, complete with commercial invoices, packing lists, and export customs documentation.
Cab-over-engine heavy-duty trucks feature air- or coil-sprung cab suspension mounts that move independently of the rigid steel ladder chassis over uneven roads, as well as hydraulic cab-tilting mechanisms for engine access. The FAW J6 lower steering drive shaft assembly 3404092A1057 provides the critical flexible mechanical link bridging the cab-mounted upper steering column and the frame-mounted power steering gear input shaft.
As the driver turns the steering wheel, rotational torque passes through the upper universal joint yoke, down the precision-broached telescopic slip shaft, and through the lower universal joint yoke directly into the steering gear worm shaft. The dual needle-bearing U-joints accommodate sharp angular offsets between the cab and frame without binding or velocity fluctuation, while the low-friction telescopic spline section smoothly extends and retracts to absorb vertical cab bounce and allow effortless cab tilting.
Lower steering shafts operate directly above the front axle in an exposed under-cab environment subjected to water spray, mud, road salt, constant torsional reversals, and continuous cab-suspension oscillation:
Drop-Forged 40Cr / 42CrMo Alloy Steel Yokes & Splined Shaft: High-tensile forged steel upper and lower clamping yokes paired with induction-hardened splined shafts engineered to eliminate torsional twist, spline wear, and pinch-bolt ear deformation.
Precision Sealed Needle-Bearing Universal Joints: Cross-trunnion U-joints packed with extreme-pressure lithium complex grease and protected by multi-lip elastomer seals to deliver zero-backlash steering feel while blocking road grit and moisture.
Low-Friction Coated Telescopic Slip Spline & Dust Boot: Precision-machined sliding splines coated to prevent galling or axial binding during cab suspension travel, shielded by a flexible rubber accordion boot against mud and water ingress.
CNC-Broached Pinch-Bolt Clamping Yokes: Exact OEM spline tooth count and pinch-bolt relief slots ensure positive mechanical locking onto both the steering column stub shaft and steering gear input shaft.
A worn, loose, or seized lower steering drive shaft causes dangerous steering wheel free-play, metallic clunking over bumps, or stiff "notchy" steering effort. Fleet mechanics and front-end specialists should inspect or replace the 3404092A1057 lower steering drive shaft assembly upon detecting:
Excessive Steering Wheel Play & Delayed Directional Response: Rotational slop felt when rocking the steering wheel back and forth, caused by worn U-joint needle bearings or loose telescopic slip splines.
Sharp Metallic Knocking or Clunking Under the Cab Floor: Audible clunks over rough pavement or during rapid steering reversals due to dry, rusted U-joint trunnions or worn clamping yoke splines.
Stiff, Binding, or "Notchy" Steering Wheel Return: Heavy spots felt every half-turn of the steering wheel caused by a seized universal joint cross, or harsh cab-ride vibration transferred into the steering wheel due to a rusted, locked-up telescopic slip joint.
Torn Spline Dust Boot or Loose Pinch-Bolt Clamping Yokes: Exposed, grease-depleted sliding splines or elongated pinch-bolt holes allowing movement on the steering gear input shaft.
To maintain centered steering wheel alignment and zero-play mechanical safety when installing the 3404092A1057 lower steering drive shaft assembly:
Lock Steering Wheel & Front Wheels Straight Ahead Before Disassembly: Secure the steering wheel in the exact center position with the front steer tires pointing straight ahead before unbolting the old lower shaft so the clockspring / turn-signal cancellation cam is not rotated out of index.
Align U-Joint Phasing & Clean Input Shaft Splines: Wire-brush rust and dirt off both the upper column shaft and lower steering gear splines; verify that the upper and lower U-joint yokes on the 3404092A1057 assembly remain properly phased in the same plane for smooth constant-velocity rotation.
Seat Pinch Bolts in Shaft Grooves & Torque to OEM Specification: Slide each yoke fully onto its mating shaft until the pinch-bolt hole aligns cleanly with the machined annular groove on the shaft, install new Grade 10.9 pinch bolts, torque to FAW OEM specifications, and verify full lock-to-lock steering clearance and cab-tilt travel before road dispatch.
Q1: Which truck model is part number 3404092A1057 engineered for?Answer: Part number 3404092A1057 is an OEM-standard lower steering drive shaft assembly engineered specifically for FAW Jiefang J6 heavy-duty commercial trucks, tractors, and dumpers.
Q2: Does the 3404092A1057 steering shaft include both universal joints and the telescopic slip section?Answer: Yes, it is supplied as a complete factory-assembled lower intermediate steering drive shaft featuring upper and lower pinch-bolt U-joint yokes and the telescopic splined slip shaft ready for direct installation.
Q3: How is this 8.0 kg steering drive shaft packaged for international export?Answer: Each 8.0 kg shaft assembly (45 x 15 x 15 cm unit dimensions) is treated with anti-rust protection and supplied in standard nude protective wrapping, with reinforced export carton or wooden pallet consolidation available for air or ocean shipments.
Q4: What are the MOQ, payment terms, and delivery lead times for B2B wholesale buyers?Answer: We support flexible procurement starting from a 1-piece MOQ up to bulk distributor orders. Payment terms are T/T (30% deposit) and Western Union, with stocked inventory dispatched within 7 days from Shandong, China.



Address
Lemeng Apartment, Jingshi Road, Huaiyin District, Jinan City, Shandong Province
Tel

