Products
FAW J6 Engine Alternator Assembly 3701010B36D
  • FAW J6 Engine Alternator Assembly 3701010B36DFAW J6 Engine Alternator Assembly 3701010B36D
  • FAW J6 Engine Alternator Assembly 3701010B36DFAW J6 Engine Alternator Assembly 3701010B36D
  • FAW J6 Engine Alternator Assembly 3701010B36DFAW J6 Engine Alternator Assembly 3701010B36D
  • FAW J6 Engine Alternator Assembly 3701010B36DFAW J6 Engine Alternator Assembly 3701010B36D

FAW J6 Engine Alternator Assembly 3701010B36D

Model: 3701010B36D
The FAW J6 Engine Alternator Assembly 3701010B36D is an OEM-standard 24V heavy-duty charging generator unit engineered specifically for FAW Jiefang J6 commercial trucks, long-haul tractors, and heavy dumpers. Supplied directly from China—the core manufacturing and export hub for FAW Jiefang engine electrical spare parts—this complete charging assembly converts mechanical crankshaft belt drive energy into regulated 24V DC electrical power to recharge dual battery banks and run engine ECUs, lighting, cab HVAC, and air brake solenoids during continuous freight operations. International B2B buyers, commercial fleet workshops, and regional spare parts distributors can request a wholesale quotation (RFQ) starting from a 1-piece sample trial order up to bulk carton wholesale procurement, backed by guaranteed OEM quality and 3 to 7 working days fast dispatch.
    Rating: 5.0
    (Rating Count: 15)

    Parameter Specification
    Product Name FAW J6 Engine Alternator Assembly / 24V Heavy-Duty Charging Generator
    Part Number / OE NO. 3701010B36D
    Vehicle Brand & Truck Compatibility FAW Jiefang J6 Series Heavy-Duty Commercial Trucks, Tractors & Dumpers
    System Category Heavy-Duty Commercial Vehicle 24V Electrical Charging & Power Generation System
    Product Purpose Fleet Engine Electrical Maintenance, Charging System Replacement & Repair (replace/repair)
    Product Condition 100% Brand-New OEM Standard (New)
    Quality Standard Fully Guaranteed, Bench-Tested OEM Standard
    Place of Origin China
    Minimum Order Quantity (MOQ) 1 Piece (Sample Trial Orders & Bulk Wholesale Supported)
    Selling Units Single Item
    Standard Packaging Heavy-Duty Protective Carton Box with Molded Cushioning
    Payment Terms T/T (Telegraphic Transfer)
    Delivery Lead Time Fast Dispatch within 3 to 7 Working Days

    Packaging, Logistics & B2B Wholesale Procurement

    • Direct Factory Wholesale & Flexible MOQ: Sourced directly from our Chinese OEM supply base to eliminate middleman markups, offering competitive tiered wholesale pricing for distributor bulk orders alongside a 1-piece MOQ for urgent breakdown replacements or sample evaluation.

    • Export-Ready Shock-Resistant Packaging: Each alternator assembly is sealed in an anti-moisture protective bag, braced inside molded shock-absorbing inserts to protect the drive pulley, cooling fins, and rear terminal studs, and packed in a reinforced export carton box (consolidated onto wooden pallets for bulk sea freight).

    • Fast Global Dispatch & Multi-Modal Freight: Ready-to-ship warehouse stock enables order fulfillment within 3 to 7 working days, supporting urgent air cargo dispatch for grounded fleet trucks as well as LCL/FCL ocean container consolidation with full-line FAW Jiefang, Sinotruk, Shacman, and Weichai engine and electrical spare parts.

    • Streamlined International Trade Terms: Supports standard B2B procurement workflows with T/T payment terms, complete with commercial invoices, packing lists, and export customs documentation.

    Operating Mechanics & 24V Heavy-Duty Power Generation Dynamics

    Modern heavy-duty commercial trucks rely on high-output charging systems to power electronic fuel injection ECUs, ABS/EBS braking modules, dashboard instrumentation, cab air conditioning, and auxiliary sleeper loads while keeping dual 12V series-connected batteries fully charged. The FAW J6 engine alternator assembly 3701010B36D serves as the primary electromechanical power source once the diesel engine is running.

    Driven by the engine crankshaft pulley via a multi-ribbed serpentine belt, the rotor shaft spins an energized electromagnetic field inside stationary three-phase copper stator windings, generating alternating current (AC). An integrated heavy-duty silicon rectifier bridge converts this three-phase AC output into smooth direct current (DC), while an internal solid-state voltage regulator continuously modulates rotor field excitation to hold system charging voltage steady (typically 27.5V–28.5V on 24V truck systems) regardless of engine RPM fluctuations or electrical load surges.

    Heavy-Duty Electromechanical Engineering & Thermal Durability

    Engine-mounted alternators operate continuously beside hot exhaust manifolds and diesel engine blocks under extreme vibration, dust, and electrical loads:

    • High-Purity Copper Stator & Rotor Windings: Wound with high-temperature Class-H enameled copper wire to maximize electrical efficiency, low-RPM charging output, and resistance to thermal insulation breakdown.

    • Heavy-Duty Avalanche Rectifier Bridge: Equipped with high-ampere press-fit silicon diodes engineered to handle inductive load dumps and continuous high-current battery recharging without thermal runaway.

    • Precision Solid-State IC Voltage Regulator: Built-in temperature-compensated regulator ensures accurate voltage control across sub-zero winter startups and high-ambient desert hauls, preventing battery overcharging or undercharging.

    • Die-Cast Aluminum Housing & Sealed High-Speed Bearings: Ribbed, vented cast-aluminum front and rear brackets paired with dual internal cooling fans and double-sealed, high-temperature ball bearings ensure rapid heat dissipation and long service life.

    Fleet Troubleshooting & Alternator Failure Diagnostics

    A failing or undercharging alternator causes chronic battery drain, electronic ECU fault codes, dimming lights, and roadside no-start breakdowns. Fleet mechanics and electrical technicians should inspect or replace the 3701010B36D alternator assembly upon detecting:

    1. Dashboard Battery Warning Light Illuminated While Driving: Charging system voltage dropping below battery resting voltage due to worn carbon brushes, an open rotor field, or a failed IC voltage regulator.

    2. Dead Batteries & Repeated Jump-Starts: Insufficient charging current output (below 27V at fast idle) caused by shorted rectifier diodes or damaged stator phases.

    3. Overcharging & Boiling Battery Electrolyte: Charging voltage spiking above 29.5V–30V resulting from a shorted internal voltage regulator, risking damage to sensitive truck ECUs and bulbs.

    4. Loud Grinding, Whining, or Pulley Wobble: Worn front or rear rotor ball bearings or a misaligned drive pulley causing belt squeal and mechanical drag.

    Best Practices for Installation & Truck Charging System Servicing

    To prevent electrical short circuits and ensure maximum service life when installing the 3701010B36D alternator:

    • Disconnect Battery Ground Cable Before Servicing: Always disconnect the main battery negative terminal (or turn off the master battery isolator switch) before unbolting the heavy-gauge B+ output cable to prevent accidental shorting against the engine block.

    • Inspect Serpentine Belt, Tensioner & Mounting Brackets: Check the drive belt for glazing or cracks and verify automatic tensioner alignment; inspect all battery cables and ground straps for corrosion, as high resistance in charging cables overloads the new alternator.

    • Verify Charging Voltage & Belt Tension After Startup: Start the FAW J6 engine, inspect pulley tracking, and measure charging voltage across the battery terminals with a multimeter (confirming ~27.8V–28.4V under normal load) before releasing the vehicle.

    Frequently Asked Questions (FAQ)

    Q1: Is part number 3701010B36D a direct OEM replacement alternator for FAW J6 trucks?Answer: Yes, 3701010B36D is manufactured to exact OEM mounting, pulley alignment, and 24V electrical specifications for FAW Jiefang J6 commercial truck engines.

    Q2: Are alternators tested before export shipment?Answer: Yes, every 3701010B36D alternator assembly undergoes strict load-bench testing prior to packaging to verify cut-in RPM, regulated voltage stability, and full-load amperage output.

    Q3: How is the 3701010B36D alternator packaged for international shipping?Answer: Each unit is sealed against moisture, cushioned inside protective inserts to prevent pulley or terminal damage, and packed in a sturdy individual carton box suitable for air freight or consolidated ocean container shipments.

    Q4: What are the MOQ, payment terms, and delivery lead times for B2B buyers?Answer: We support flexible procurement starting from a 1-piece MOQ up to bulk distributor orders. Payment is accepted via T/T, with ready-to-ship stock dispatched within 3 to 7 working days.


    WG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light SwitchWG9719584011 Genuine Sinotruk HOWO Light Switch

    Send Inquiry
    Contact Info
    Rating:
    5.0
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept